Façade joint sealing at height in Tiana.
Dry walls inside and joints that work again: we replace the failed sealant on your façade in Tiana with a new seal, neat and flush.
5/5 · Google reviewsWhen do the joints need sealing?
- Damp inside next to the façade
- Cracked or detached sealant
- Open joints between panels
- Water getting in around windows
What joint sealing includes
-
Joint-by-joint inspection
Working from the ropes, we find cracks, debonding and empty joints.
-
Removing old sealant
We cut out and clean the old sealant until the edges are sound.
-
Backer rod
A foam rod gives the sealant the right depth.
-
Primer
Primer on the edges so the sealant bonds properly to the substrate.
-
Elastic sealant
Polyurethane or MS polymer that moves with the façade.
-
Window and panel joints
Window perimeters, expansion joints and junctions between panels.
How we reseal façade joints in Tiana
In 1960s to 80s blocks in areas such as Centre and Can Gaietà, expansion joints and precast panel joints usually still have their original sealant. When damp shows inside, we cut that seal out and redo it drop by drop.
Before sealing on buildings in areas such as La Virreina and Mas Ram, we prime the edges to suit the substrate: concrete, stone, aluminium or PVC. Then we gun in the sealant, tool it smooth and peel off the masking tape.
We check the joints from outside and the damp from inside, and give you a detailed written quote, per vertical drop or for the whole façade. We also seal joints in nearby areas: Montgat, Badalona and Alella.
Get a quote for façade joint sealing
Frequently asked questions
01Façade joint sealing at height in Tiana: which areas do you cover?
We do this work in Tiana, in areas such as Centre, Can Gaietà, La Virreina and Mas Ram, and also nearby: Montgat, Badalona and Alella. Before starting we visit the property and prepare a detailed written quote.
02Which sealant do you use for façade joints?
Elastic polyurethane or MS polymer sealants, suitable for exterior use and paintable. We choose according to the façade material and the movement the joint has to absorb.
03Can you seal just the area where water gets in?
Yes. If the problem is localised, we seal the affected vertical drop. During the visit we also check nearby joints, as they are usually the same age and equally worn.
04Why not just apply new sealant over the old?
Because new sealant does not bond well to old sealant or dust. The old one has to be removed, the edges cleaned, a backer rod fitted and primer applied; that way the joint can move without opening again.
About us
High-quality renovations in Tiana, with deadlines that are met.
We renovate flats and houses with clear planning, close follow-up and attention to every detail.
- Initial visit with no obligation
- Detailed and accurate estimate
- Follow-up until the work is finished
We work in Tiana and the surrounding area
Reformas Romero-Vera is a renovation company working in Tiana (Maresme, province of Barcelona) and specialising in façade joint sealing at height. We do this work in flats, houses and shops in every neighbourhood, with a prior visit and a detailed estimate with no obligation.
- Company
- Reformas Romero-Vera
- Service
- Façade joint sealing at height
- Area
- Tiana · Maresme, province of Barcelona
- Postcode
- 08391
- Location
- 15 km north-east of Barcelona
- Visit and estimate
- No obligation, in writing
- Phone
- +34 658 09 40 37 · WhatsApp +34 662 04 02 34
We also work in Montgat, Badalona, Alella and Sant Fost de Campsentelles.
Neighbourhoods
- Centre
- Can Gaietà
- La Virreina
- Mas Ram
Main streets and avenues
- Avinguda del President Companys
- Avinguda d'Isaac Albéniz
- Carrer d'Enric Borràs
- Carrer de Montalegre
- Carrer de Sant Cebrià
- Carrer del Marquès de Monistrol
- Passeig de la Vilesa
- Camí dels Francesos
- Plaça de l'Església
Water coming in through your façade joints?
Message us on WhatsApp or get a quote: we will check the joints and tell you which ones need redoing.