Façade joint sealing at height in Manlleu.
We remake the joints that let water into façades of buildings and houses in Manlleu, working suspended from the roof with no scaffolding on the pavement.
5/5 · Google reviewsWhen do the joints need sealing?
- Damp inside next to the façade
- Cracked or detached sealant
- Open joints between panels
- Water getting in around windows
What joint sealing includes
-
Joint-by-joint inspection
Working from the ropes, we find cracks, debonding and empty joints.
-
Removing old sealant
We cut out and clean the old sealant until the edges are sound.
-
Backer rod
A foam rod gives the sealant the right depth.
-
Primer
Primer on the edges so the sealant bonds properly to the substrate.
-
Elastic sealant
Polyurethane or MS polymer that moves with the façade.
-
Window and panel joints
Window perimeters, expansion joints and junctions between panels.
How we reseal façade joints in Manlleu
In 1960s to 80s blocks in areas such as Dalt Vila and Baix Vila, expansion joints and precast panel joints usually still have their original sealant. When damp shows inside, we cut that seal out and redo it drop by drop.
On façades in areas such as Eixample, L'Erm and Gràcia, we fit foam backer rod of the right diameter so the sealant has the correct depth and bonds only to the sides. Where the joint is shallow, we use a bond-breaker tape at the back instead.
Over 20 years in building repair: a visit, a written quote and clean work, joint by joint. We serve other areas close by as well: Torelló, Gurb and Les Masies de Voltregà.
Get a quote for façade joint sealing
Frequently asked questions
01Façade joint sealing at height in Manlleu: which areas do you cover?
We work in Manlleu in areas such as Dalt Vila, Baix Vila, Eixample, L'Erm, Gràcia, Barri Nou, La Canallena and La Cavalleria, and also nearby: Torelló, Gurb and Les Masies de Voltregà.
02Which sealant do you use for façade joints?
Elastic polyurethane or MS polymer sealants, suitable for exterior use and paintable. We choose according to the façade material and the movement the joint has to absorb.
03Can you seal just the area where water gets in?
Yes. If the problem is localised, we seal the affected vertical drop. During the visit we also check nearby joints, as they are usually the same age and equally worn.
04Why not just apply new sealant over the old?
Because new sealant does not bond well to old sealant or dust. The old one has to be removed, the edges cleaned, a backer rod fitted and primer applied; that way the joint can move without opening again.
About us
High-quality renovations in Manlleu, with deadlines that are met.
We renovate flats and houses with clear planning, close follow-up and attention to every detail.
- Initial visit with no obligation
- Detailed and accurate estimate
- Follow-up until the work is finished
We work in Manlleu and the surrounding area
Reformas Romero-Vera is a renovation company working in Manlleu (Osona, province of Barcelona) and specialising in façade joint sealing at height. We do this work in flats, houses and shops in every neighbourhood, with a prior visit and a detailed estimate with no obligation.
- Company
- Reformas Romero-Vera
- Service
- Façade joint sealing at height
- Area
- Manlleu · Osona, province of Barcelona
- Postcode
- 08560
- Location
- 70 km north of Barcelona
- Visit and estimate
- No obligation, in writing
- Phone
- +34 658 09 40 37 · WhatsApp +34 662 04 02 34
We also work in Torelló, Gurb, Les Masies de Voltregà and Les Masies de Roda.
Neighbourhoods
- Dalt Vila
- Baix Vila
- Eixample
- L'Erm
- Gràcia
- Barri Nou
- La Canallena
- La Cavalleria
- La Salut
- Vilamirosa
- Can Remissa
- La Font de Tarrés
Main streets and avenues
- Passeig de Sant Joan
- Passeig del Ter
- Carrer del Comte
- Carrer de Torelló
- Carrer de la Cavalleria
- Carrer de Vilamirosa
- Carrer del Pont
- Carrer d'Àngel Guimerà
- Plaça de Fra Bernadí
Water coming in through your façade joints?
Message us on WhatsApp or get a quote: we will check the joints and tell you which ones need redoing.