Façade joint sealing at height in Igualada.
In Igualada we stop leaks through expansion joints, panel junctions and window frames with an elastic seal that moves with the building.
5/5 · Google reviewsWhen do the joints need sealing?
- Damp inside next to the façade
- Cracked or detached sealant
- Open joints between panels
- Water getting in around windows
What joint sealing includes
-
Joint-by-joint inspection
Working from the ropes, we find cracks, debonding and empty joints.
-
Removing old sealant
We cut out and clean the old sealant until the edges are sound.
-
Backer rod
A foam rod gives the sealant the right depth.
-
Primer
Primer on the edges so the sealant bonds properly to the substrate.
-
Elastic sealant
Polyurethane or MS polymer that moves with the façade.
-
Window and panel joints
Window perimeters, expansion joints and junctions between panels.
How we reseal façade joints in Igualada
In areas such as Centre, El Rec and Sant Agustí, besides residential buildings there are warehouses and offices with panel façades. We seal panel joints, roof flashings and door and window perimeters, working on ropes.
On each joint in buildings in areas such as Fàtima, Montserrat and Set Camins, we cut out the old sealant with a blade, clean the edges back to a sound surface and check the joint is dry. New sealant will not bond to dust or old residue.
A site manager coordinates the rope access team with the residents and, when we finish, we remove sealant offcuts and tape from the façade and pavement. We also travel to the surrounding areas: Òdena, Vilanova del Camí and Santa Margarida de Montbui.
Get a quote for façade joint sealing
Frequently asked questions
01Façade joint sealing at height in Igualada: which areas do you cover?
We work in Igualada in areas such as Centre, El Rec, Sant Agustí, Fàtima, Montserrat, Set Camins, Sant Crist and Pla de la Massa, and also nearby: Òdena, Vilanova del Camí and Santa Margarida de Montbui.
02Which sealant do you use for façade joints?
Elastic polyurethane or MS polymer sealants, suitable for exterior use and paintable. We choose according to the façade material and the movement the joint has to absorb.
03Can you seal just the area where water gets in?
Yes. If the problem is localised, we seal the affected vertical drop. During the visit we also check nearby joints, as they are usually the same age and equally worn.
04Why not just apply new sealant over the old?
Because new sealant does not bond well to old sealant or dust. The old one has to be removed, the edges cleaned, a backer rod fitted and primer applied; that way the joint can move without opening again.
About us
High-quality renovations in Igualada, with deadlines that are met.
We renovate flats and houses with clear planning, close follow-up and attention to every detail.
- Initial visit with no obligation
- Detailed and accurate estimate
- Follow-up until the work is finished
We work in Igualada and the surrounding area
Reformas Romero-Vera is a renovation company working in Igualada (Anoia, province of Barcelona) and specialising in façade joint sealing at height. We do this work in flats, houses and shops in every neighbourhood, with a prior visit and a detailed estimate with no obligation.
- Company
- Reformas Romero-Vera
- Service
- Façade joint sealing at height
- Area
- Igualada · Anoia, province of Barcelona
- Postcode
- 08700
- Location
- 50 km north-west of Barcelona
- Visit and estimate
- No obligation, in writing
- Phone
- +34 658 09 40 37 · WhatsApp +34 662 04 02 34
We also work in Òdena, Vilanova del Camí, Santa Margarida de Montbui and Jorba.
Neighbourhoods
- Centre
- El Rec
- Sant Agustí
- Fàtima
- Montserrat
- Set Camins
- Sant Crist
- Pla de la Massa
- Sesoliveres
Main streets and avenues
- Rambla de Sant Isidre
- Passeig de Verdaguer
- Avinguda de Barcelona
- Carrer de l'Argent
- Carrer de la Soledat
- Carrer de Sant Magí
- Carrer del Born
- Carrer de Sant Agustí
Water coming in through your façade joints?
Message us on WhatsApp or get a quote: we will check the joints and tell you which ones need redoing.