Underfloor heating installation in Argentona.
We design the circuits, lay the pipe and pour the screed in Argentona, so the underfloor heating runs at low temperature on a heat pump or boiler.
5/5 · Google reviewsWhen should you consider underfloor heating?
- You are replacing the floors anyway
- Warm only next to the radiators
- Radiators taking up wall space
- Switching to a heat pump
What the underfloor heating includes
-
Circuit layout
Pipe spacing and number of circuits worked out for each room.
-
Insulation and edge strip
Insulation boards and a perimeter strip so the heat goes up, not down.
-
PEX or multilayer pipe
Laid in a spiral with no joints under the floor.
-
Manifold with flow meters
Every circuit balanced from a single accessible cabinet.
-
Pressure test
Circuits filled and kept under pressure before and during the screed pour.
-
Screed
An even, level layer, ready for your chosen flooring.
What we check before lifting the floor
In houses in areas such as Les Ginesteres, Can Raimir and Can Ferreters that are switching from an oil boiler to a heat pump, underfloor heating is the emitter that works best with low-temperature water. We design the circuits around the output of the heat pump.
In flats and houses in areas such as El Cros, Sant Miquel del Cros and Sant Jaume de Treià we pour the screed with the circuits full and under pressure, so any damage shows at once. Movement joints go in at doorways and across large areas.
With over 20 years in renovation and installations, we explain which system suits your home and set it out in a written quote. We also cover nearby areas: Mataró, Cabrera de Mar and Cabrils.
Get a quote for your underfloor heating
Frequently asked questions
01Underfloor heating installation in Argentona: which areas do you cover?
We work in Argentona in areas such as Les Ginesteres, Can Raimir, Can Ferreters, Can Serra de Lledó, Madà, El Cros, Sant Miquel del Cros and Sant Jaume de Treià, and also nearby: Mataró, Cabrera de Mar and Cabrils.
02What floor height does it take up?
A standard system adds around 8–10 cm for insulation, pipe and screed, plus the floor finish. Where height is tight, low-profile systems take up much less.
03Which floor finishes can go on top?
Ceramic and porcelain tiles transfer heat most readily. Engineered wood or vinyl rated for underfloor heating also work, at the thickness the manufacturer specifies.
04What heats the water?
A heat pump, the most efficient match because both work at low temperature, or a condensing boiler. If the unit allows it, the floor can also provide gentle cooling in summer.
About us
High-quality renovations in Argentona, with deadlines that are met.
We renovate flats and houses with clear planning, close follow-up and attention to every detail.
- Initial visit with no obligation
- Detailed and accurate estimate
- Follow-up until the work is finished
We work in Argentona and the surrounding area
Reformas Romero-Vera is a renovation company working in Argentona (Maresme, province of Barcelona) and specialising in underfloor heating installation. We do this work in flats, houses and shops in every neighbourhood, with a prior visit and a detailed estimate with no obligation.
- Company
- Reformas Romero-Vera
- Service
- Underfloor heating installation
- Area
- Argentona · Maresme, province of Barcelona
- Postcode
- 08310
- Location
- 25 km north-east of Barcelona
- Visit and estimate
- No obligation, in writing
- Phone
- +34 658 09 40 37 · WhatsApp +34 662 04 02 34
We also work in Mataró, Cabrera de Mar, Cabrils and Dosrius.
Neighbourhoods
- Les Ginesteres
- Can Raimir
- Can Ferreters
- Can Serra de Lledó
- Madà
- El Cros
- Sant Miquel del Cros
- Sant Jaume de Treià
- Can Pins
- Clarà
- Lledó
- El Puig
Main streets and avenues
- Carrer Gran
- Carrer de Barcelona
- Carrer de Sant Julià
- Carrer del Doctor Samsó
- Avinguda de Puig i Cadafalch
- Carrer de Mataró
- Carrer del Doctor Farrero
- Carrer de l'Abat Escarré
- Carrer Nou
Considering underfloor heating?
Tell us on WhatsApp the floor area and what flooring you have now, or get a quote and we will explain the next steps.